 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28. STEERING SYSTEM MAINTENANCE (CONT)
b. Universal Joint (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
7
c.
Four bushings
Install
In top yoke (14) and slip
(cont)
(11) and
yoke (18)
seals (13)
d.
Top yoke (14)
Position
In soft jawed vise
and slip
yoke (18)
e.
Soft jawed
Close jaws
Seats bushings (11); repeat
vise
for other ends of cross
(12)
f.
Four bushings
Depress
Use brass rod or discarded
(11)
bushing to set bushings
below retaining ring
grooves
g.
Four retaining
Install
Use retaining ring pliers
rings (10)
NOTE
Perform steps 7b thru 7g to install cross (7), bushings (6), and retaining rings (5) in bottom yoke (9) and splined yoke (15).
h.
Slip yoke (18)
Position
In soft jawed vise
i.
Seal cap (16)
Install
Over splines on splined yoke
and new seal
(15)
(17)
j.
Splined yoke
Insert
In slip yoke (18); line up
(15)
scribe marks made in step
3c above
k.
Seal cap (16)
Bend tabs
Into grooves of splined yoke
(15)
l.
Cross (7 and
Lubricate
Use grease gun
12) and slip
yoke (18)
INSTALLATION
8
Universal
a.
Top yoke (14)
Position
On steering column shaft
joint
b.
Lock washer
Install and
(19), capscrew
tighten
(4), and nut
(3)
3-247
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals