|
|
TM 9-2320-285-24-2
3-27. STEERING SYSTEM TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
10. POWER STEERING PUMP NOT DELIVERING OIL (Cont)
Step 4.
Disassemble power steering pump (para 3-28f).
Examine rotor slots for dirt, grime, or small metal chips.
Clean rotor and vanes and reassemble pump (para 3-28f). Check for
free vane movement.
a. If vane movement is not free, replace rotor and vanes (para
b. If vane movement is free, overhaul or replace power steering
pump (para 3-28f).
11. POWER STEERING PUMP MAKING NOISE
Step 1.
Remove power steering pump (para 3-28f).
Check that gear and coupling are correctly aligned and secure.
a. If gear and coupling are not correctly aligned or are loose,
repair or replace (para 3-28f).
b. If gear and coupling are correctly aligned and secure, proceed
to step 2 below.
Step 2.
Disassemble power steering pump (para 3-28f).
Check shaft seal, bearings, and pump cartridge assembly (ring,
rotor, pins, and vanes) for wear or damage.
If shaft seal, bearings, or pump cartridge assembly parts are worn
or damaged, replace (para 3-28f).
3-236
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |