|
|
TM 9-2320-285-24-2
3-24.
BRAKE CONTROLS MAINTENANCE (CONT)
e.
Automatic Drain Valve (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION
3
a
Cover (3) and
Inspect
Replace if cracked, warped,
body (9)
or otherwise damaged
b
All other parts
Inspect
Replace if cracked, broken,
or threads damaged
REASSEMBLY
NOTE
Wrap Teflon tape around threads of pipe plug (8) and adapter (7)
before installation.
4
Body (9)
a
Pipe plug (8)
Install and
If removed
tighten
b
Adapter (7)
a
Install Large end in body (9)
b
Tighten To 130-170 pounds inch
NOTE
In the following steps, use new items 4 thru 6 included in automatic
drain valve maintenance kit.
c
Seal ring (6)
Position
In cover (3) groove
d
Valve (4) and
Position
Place valve (4) into valve
valve guide
guide (5) and position in
(5)
cover (3)
e
Cover (3)
Position
On body (9)
Be sure valve
(4) does not move out
of
place
f
Four capscrews
Install
Tighten capscrews (1) to
(1) and lock
80-120 pounds inch
washers (2)
3-190
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |