|
|
TM 9-2320-285-24-2
3-19. REAR AXLE MAINTENANCE (CONT)
a. Axle Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (cont)
5
c.
Spacer (10),
Remove
(cont)
pad (11), and
six bushings
(12)
d. Six capscrews
Remove
(13) and
washers (14)
NOTE
Repeat step 5 above on left hand frame rail.
INSTALLATION
6
Frame rails
a. 12 capscrews
Install
(13) and
washers (14)
b. 12 bushings
Assemble
On spacer (10)
(12) and two
pads (11)
c. Two spacers
Position
On capscrews (8)
(10)
d. 12 nuts (8) and
Install and
washers (9)
tighten
7
Axle as-
sembly (6)
WARNING
Be sure vehicle is properly supported before proceeding. Failure to do so could cause serious injury or
death due to vehicle falling on you. If you are injured, obtain medical aid immediately.
a. Two locating
Position
On dowels on axle assembly
pads (7)
(6) ends
b. Axle assembly
a. Position
Use roller jack; position
(6)
axle assembly against
spacers (10)
b. Raise
Raise axle assembly; check to
see that holes in vehicle
frame align with holes in
spacers (10)
3-148
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |