 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-18. FRONT AXLE MAINTENANCE
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
6
d. Bushings (36
Inspect
Inspect for flaking, crack-
(cont)
and 37)
ing, or excessive wear.
Replace if any of these
conditions are observed
e. All other parts
Inspect
Replace if cracked, broken,
distorted, or threads
damaged
REASSEMBLY
7
Axle center
a. Identification
Position
On axle center (4), if
(4)
plate (39)
removed
b. Two drive
Install
screws (38)
8
Steering
a. New bushing
Install
If removed. Use arbor press
knuckle(36)
and bushing removal and in-
(31)
stallation tool. Align oil
holes in bushing with oil
holes in steering knuckle.
Press new bushing into
knuckle about 1/8 inch;
relieve press pressure.
Press bushing in another
1/2 inch; relieve press
pressure. Press bushing in
until flush with surface of
upper seal counterbore
b. New bushing
Install
If removed. Use arbor press
(37)
and bushing removal and in-
stallation tool (refer to
step 14a above). Press
bushing in until flush with
inside surface of lower
knuckle boss
3-137
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals