 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-18. FRONT AXLE MAINTENANCE
This task covers:
a. Removal
d. Inspection
b. Disassembly
e. Reassembly
c. Cleaning
f. Installation
INITIAL SETUP
Tools
Personnel Required
No. 1 Common Organizational Maintenance
Two Automotive Repairers MOS 63H
Tool Kit
Socket wrench set
References
Open end wrench set
LO 9-2320-285-12 (M878A1
Torque wrench
Lubrication Order)
Hammer
Safety glasses
Equipment Condition
Vise jaw caps
Paragraph
Condition Description
Screwdriver
Machinist's vise
Parked on level surface; park-
Automotive Mechanic's Tool Kit
ing brake applied; engine off.
Pry bar
Rear wheels blocked.
Hammer
Front end supported, and hoist
Pliers
in place.
Machinist's rule
2-57
Front wheels and tires
Brass drift
removed.
Jack
3-28e
Drag link disconnected.
Two dollies
2-43b
Hubs and drums removed.
Arbor press
2-51d(1)
Brake chambers removed.
Dial indicator
2-50a
Front axle brakes and backing
Bushing removal and installation tool
plates removed.
Upper knuckle bushing reamer
2-64
Shock absorbers removed.
Lower knuckle bushing reamer
3-28c
Tie rod removed.
Block of wood
Materials/Parts
Cleaning
solvent
Item 1, Appendix C
Clean cloths
Item 2, Appendix C
Light machine
oil
Item 7, Appendix C
Tags
Item 14, Appendix C
Cotter pins
FSCM 78500 PN K2616
Cotter pins
FSCM 78500 PN K2412
Four gaskets
FSCM 78500 PN 2008Q823
Two oil seals
FSCM 78500 PN A1205X1428
Two oil seals
FSCM 78500 PN A1205B1432
3-130
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals