DISASSEMBLY (cont) - TM-9-2320-285-24-20058

TM 9-2320-285-24-2

3-10.

STARTER MAINTENANCE (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY (cont)

Field coil (73) Remove

(cont)

with stud

(74)

Stud (74)

Remove

Unsolder and remove only if

necessary for replacement

CLEANING

Frame (12),

Clean

Wipe with a clean, dry, lint-

brush plate

free cloth only. Do not use

assembly (16),

cleaning solvent

brushes (23),

armature (54),

drive assem-

bly (58), and

field coil

(73)

Electrical lead Clean

Wipe with clean, dry cloth

(22)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear

protective goggles and gloves and use only in a well ventilated area. Avoid contact

with skin, eyes, and clothes and don't breathe vapors. Do not use near open flame

or excessive heat and don't smoke when using it. Failure to do so could cause

serious injury. If you become dizzy while using cleaning solvent, get fresh air and

medical attention immediately. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with water and

obtain medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts

with compressed air. Failure to do so could cause serious injury to eyes and

possible blindness. If you hurt your eyes or if a foreign object is blown into your

eyes, seek medical attention immediately.

3-52