REMOVAL - TM-9-2320-285-24-10946

TM 9-2320-285-24-1

2-87.

PRESSURE GAGES MAINTENANCE

OIL PRESSURE Gage (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL

NOTE

Tag and identify all electrical leads before disconnecting and removing.

Instrument

a. Two electrical

Tag

panel,

leads

underside

(3 and 4)

b. Two nuts (1)

Remove

and lock

washers (2)

c. Two electrical

Disconnect

leads

(3 and 4)

d. Two nuts (5)

Remove

and lock

washers (6)

e. Mounting clamp

Remove

(7)

Instrument

Oil pressure gage

Remove

Lift from instrument panel

panel, top(8)

CLEANING

a. Oil pressure

Clean

Wipe with clean, dry cloth

gage (8) and

leads (3 and

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective

goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and

clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you become dizzy while

using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or

clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes

with water and seek medical aid immediately.

2-923