|
|
TM 9-2320-285-24-1
2-81.
SPEEDOMETER TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
POINTER MOVES ERRATICALLY OR SCRAPING NOISE IS HEARD
Step 1.
Remove speedometer cable and check if speedometer cable is kinked
a.
If speedometer cable is kinked, replace (para 2-85).
b.
If speedometer cable is not kinked, go to step 2 below.
Step 2.
Check speedometer cable for inadequate lubrication.
a.
If speedometer cable is inadequately lubricated, lubricate (para
b.
If speedometer cable is adequately lubricated, go to step 3
below.
Step 3.
Inspect speedometer cable housing for dents, sharp bends, or other
damage.
a.
If speedometer cable housing is damaged, replace speedometer
cable and housing (para 2-85).
b.
If speedometer cable housing is not damaged, go to step 4 below.
Step 4.
Replace speedometer head (para 2-85).
a.
If malfunction is corrected, speedometer head was defective; no
further action is required.
b.
If malfunction is not corrected, go to step 5 below.
Step 5.
Replace speedometer adapter and gear assembly (para 2-85).
a.
If malfunction is corrected, speedometer adapter or gear
assembly was defective; no further action is required.
b.
If malfunction is not corrected, transmission requires repair;
notify direct support maintenance.
2-907
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |