|
|
TM 9-2320-285-24-1
2-79. CAB TILT HYDRAULIC SYSTEM MAINTENANCE (CONT)
b. Lines and Fittings (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
5
a. Three hose as-
Clean
Use clean cloth moistened
semblies (2,
with clean transmission
6, and 15)
fluid
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear
protective goggles and gloves and use only in a well ventilated area. Avoid contact with
skin, eyes, and clothes and don't breathe vapors. Do not use near open flame or
excessive heat and don't smoke when using it. Failure to do so could cause serious
injury. If you become dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water and seek medical aid
immediately.
Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with
compressed air. Failure to do so could cause serious injury to eyes and possible
blindness. If you hurt your eyes or if a foreign object is blown into your eyes, seek
medical attention immediately.
b. All other parts
Clean
Use cleaning solvent P-D-680;
dry with compressed air
INSPECTION
6
a. Rose assemblies
Inspect
Replace if cracked, worn,
and fittings
chafed, broken, or threads
damaged
b. All other parts
Inspect
Replace if cracked, split, or
threads damaged
INSTALLATION
7
Left hand
a. Hose assembly
Connect
frame rail
(15)
b. Fitting (18)
Tighten
c. Tee (16) and
Install
adapter (17)
2-904
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |