|
|
TM 9-2320-285-24-1
2-78. FIFTH WHEEL HYDRAULIC SYSTEM MAINTENANCE (CONT)
a.
Fifth Wheel Control Lever and Cable (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Control
a. Cotter pin (1)
Remove and
valve,
discard
left hand
b. Clevis pin (2)
Remove
frame rail
c. Nut (33)
Loosen
d. Clevis (3) and
Remove
From cable (12)
nut (33)
e. Two nuts (34)
Loosen
f. Cable (12)
Disconnect
Slide from valve plate
g. Two nuts (34)
Remove
From cable (12)
and washers
(35)
2
Left hand
Two tie straps
Cut, remove,
Note locations for installa-
frame rail
(38)
and discard
tion
3
Cab,
a. Three tie
Cut, remove,
From protective hose (41);
underside
straps (40)
and discard
note locations for instal-
lation
b. Protective hose Remove
From fifth wheel and gear
(41)
shift cables
c. Nut (4) and
Remove
clamp (5)
d. Tie straps (39
Cut, remove,
Note locations for installa-
and 43)
and discard
tion
e. Two nuts (8),
Remove
screws (9),
clamp (10),
and spacer
(11)
f. Two screws (29) Loosen
g. Lever (27) and
Move
Use movement to disengage
cable (12)
pivot (7) from lever and
move through slot in side
of housing (32)
h. Setscrew (6)
Loosen
Remove only if necessary for
replacement of pivot (7) or
cable (12)
i.
Pivot (7)
Remove
From cable (12)
j.
Cable (12)
Remove
From tractor
2-870
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |