|
|
TM 9-2320-285-24-1
2-73.
HEATERS MAINTENANCE (CONT)
e.
Coolant Heater and Pump (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
6
o. Fitting (20)
Remove
(con
t)
p. Reducer bushing
Remove
(21)
q. Fitting (22)
Remove
r. Reducer bushing
Remove
(23)
s. Coupling (24)
Remove
t. Fitting (25)
Remove
u. Reducer bushing
Remove
(26)
v. Two locknuts
Remove
(27), washers
(28), and
capscrews (29)
w. Pump support
Remove
From heater support bracket
bracket (30)
(12)
and pump (31)
x. Four locknuts
Remove
(32), washers
(33), and
capscrews (34)
y. Heater assembly
Remove
From heater support bracket
(35) with
(12)
thermostat
(36)
7
Thermostat
a. Two strain
Remove
Squeeze and pull from cover
(36)
reliefs (41)
(43) using pliers; then
separate from 3-wire cords
(6 and 45)
b. Two screws (42)
Remove
c. Cover (43)
Slide back
Slide until 3-wire cords
(6 and 45) terminal ends
are accessible
d. 3-wire cords
a. Tag
(6 and 45)
b. Disconnect
Unplug from sensor (49)
e. Screw (46)
Remove
f. Wire nut (47)
Remove
g. 3-wire cords
Remove
Separate wire ends and pull
(6 and 45)
from cover (43)
h. Two setscrews
Remove
(48)
i. Sensor (49)
Remove
Pull from base (68)
j. Clamp (50)
Loosen
2-841
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |