|
|
TM 9-2320-285-24-1
2-73.
HEATERS MAINTENANCE (CONT)
b.
Defroster Control, Heater Temperature Control, and Fresh Air Control.
This task covers:
a. Removal
c.
Inspection
b. Cleaning
f.
Installation/Adjustment
INITIAL SETUP:
Tools
Personnel Required
No. 1 Common Organizational Maintenance
Wheel Vehicle Mechanic MOS 63B
Tool Kit
Screwdriver
Equipment Condition
Combination wrench set
Paragraph
Condition Description
Safety glasses
Parked on level surface,
Materials/Parts
engine off, and parking brake
Cleaning solvent
Item 1, Appendix C
applied.
Clean cloths
Item 2, Appendix C
2-34a
Battery ground cable
Tags
Item 14, Appendix C
disconnected.
Detergent
Item 27, Appendix C
2-26g(1)
Instrument panel raised.
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Instrument
a. Three knobs (1)
Remove
Rotate counterclockwise
panel, top
b. Nut (2)
Remove
NOTE
Tag and identify all cables before disconnecting and removing.
2
Instrument
a. Three cables
Tag
panel,
(7, 10, and
underside
13)
b. Cable (13)
Lower
From panel (17)
c. Nut (3)
Remove
From free end of cable (13)
d. Two locknuts
Loosen
Slide down on cables (7 and
(4)
10)
3
Temperature
a. Screw (5) and
Remove
valve
clip (6)
b. Cable (7)
Disconnect
Pull from temperature valve
lever
c. Locknut (4)
Remove
From free end of cable (7)
2-820
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |