REMOVAL (cont) - TM-9-2320-285-24-10840

TM 9-2320-285-24-1

2-73.

HEATERS MAINTENANCE (CONT)

Cab Heater, Hoses, and Temperature Valve (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

f. Two capscrews

Remove

(cont)

(28), seal

plate (29),

and bracket

(30)

g. Heater (27)

Remove

From cab

CLEANING

a. All hoses

Clean

Use clean cloth and mild

detergent solution

b. Heater (27)

a. Clean

Wipe exterior of motor with

clean, dry cloth. Clean

remainder of exterior with

clean cloth and mild

detergent solution

b. Flush

Connect water supply to hose

ports and flush core; then

reverse connection and

flush in opposite direction

until water is clear

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you

become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water and seek medical aid immediately.

c. All other parts Clean

Use cleaning solvent P-D-680;

dry with clean cloths

2-817