|
|
TM 9-2320-285-24-1
2-70.
REARVIEW MIRRORS MAINTENANCE (CONT)|
a. Side Mirrors (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
3
d. Mounting tube
Separate
From mounting brackets (12)
(cont)
(13) and two
brackets (11)
e. Two nuts (15)
Remove
From mirror (14)
lock washers
(16) mount-
ing brackets
(12) and
spacers (17)
NOTE
Repeat step 3 to disassemble right hand side mirror.
CLEANING
4
a. Mirror (14)
Clean
Use solution of clean water
and detergent; rinse with
clean clear water and dry
with clean cloths
WARNING
Dry cleaning solvent (P-D-680) used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a well
ventilated area. Avoid contact with skin eyes and clothes and don't
breathe vapors. Do not use near open flame or excessive heat and don't
smoke when using it. Failure to do so could cause serious injury. If you
become dizzy while using cleaning solvent get fresh air and medical
attention immediately. If contact with skin or clothes is made flush with
large amounts of water. If contact with eyes is made wash eyes with
water and seek medical aid immediately.
b. All other parts
Clean
Use cleaning solvent P-D-680;
dry with clean cloths
2-792
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |