|
|
TM 9-2320-285-24-1
2-69.
WINDSHIELD WIPER AND WASHER MAINTENANCE (CONT)
b.
Windshield Wiper Motor and Switch (cont).
(1) Switch (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
5
c.
Knob (6)
Inspect for:
Replace if defects are
(cont)
cracks
observed
chipping
d. All other parts
Inspect for:
Replace if defects are
thread
observed
damage
distortion
deformation
INSTALLATION/REPLACEMENT
6
Cab wall,
a. Fitting (10)
Install
In tee
right side
b. Hose (1)
Connect
Connect by removing fitting
(10) nut and ferrule. Slide
nut onto hose (1), then
install ferrule on end of
hose. Insert ferrule and
hose into fitting (10),
then tighten nut
7
Wiper
a. Three elbows
Install
In wiper control (9) ports
control
(4)
(9)
b. Three hoses
Connect
Connect hose (1) to IN port
(1 thru 3)
of wiper control (9);
connect hose (2) to RUN
port; connect hose (3)
to PARK port. Connect by
removing elbow (4) nut and
ferrule. Slide nut onto
hose, then install ferrule
on end of hose. Insert
ferrule and hose into elbow
(4) and tighten nut
8
Instrument
a. Wiper control
Position
From bottom of instrument
panel, left
(9) with
panel
side
hoses (1, 2,
and 3)
2-777
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |