 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-69.
WINDSHIELD WIPER AND WASHER MAINTENANCE (CONT)
a.
Windshield Wiper and Arm (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Front of
a. Wiper arm (5)
Move
Pull away from windshield and
vehicle,
insert small drift punch in
windshield
hole at base of wiper arm
to hold wiper arm away from
windshield
b. Screw (1)
Remove
Support wiper blade (2)
c. Wiper blade (2)
Remove
d. Capnut (3) and
Remove
lock washer
(4)
e. Wiper arm (5)
Remove
Pull from motor shaft
f. Knurled driver
Remove
If necessary
(6)
g. Rain shield (7)
Remove
If necessary
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective
goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and
clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't
smoke when using it. Failure to do so could cause serious injury. If you become dizzy while
using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or
clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes
with water and seek medical aid immediately.
2
a. Wiper blade (2)
Clean
Use clean cloth moistened
with cleaning solvent to
clean metal parts of blade.
Use clean cloth to clean
other parts of blade
b. Rain shield (7)
Clean
Use clean cloth moistened
with detergent
c.
All other parts
Clean
Use cleaning solvent P-D-680;
dry with clean cloths
2-771
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals