|
|
TM 9-2320-285-24-1
2-65.
BODY AND CAB MAINTENANCE (CONT)
e.
Bumper and Grille Guard (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
4
b. Pins (2 and 4)
Inspect for:
Replace if defective
(cont)
cracks
bent or
twisted
condition
c. Grille guard
Inspect for:
Repair broken welds by
(11)
broken
welding; replace if other
welds
defects are observed
cracks
dents
d. Bumper (15)
Inspect for:
Repair broken welds by
broken
welding; replace if other
welds
defects are observed
cracks
e. All other parts
Inspect for
Replace if defective
thread
damage
deformation
INSTALLATION / REPLACEMENT
5
Front of
a. Chain hoist
Attach
To bumper (15)
vehicle
WARNING
Be sure chain hoist is securely fastened to bumper (15) before performing steps 5b and 5c
below. Failure to do so could cause serious injury due to bumper falling on you. If you are
injured by falling equipment, obtain medical aid immediately.
b. Bumper (15)
Position
Use chain hoist and position
on front of vehicle
c. Four capscrews
Install and
(12), washers
tighten
(14), and
locknuts (13)
d. Chain hoist
Remove
From bumper (15)
2-719
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |