|
|
TM 9-2320-285-24-1
2-65.
BODY AND CAB MAINTENANCE (CONT)
d.
Rear Cab Guard and Heat Shield (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
12
Rear cab
a. Muffler bracket
Position
Against rear cab guard with
guard (5),
mounting holes aligned;
right side
b. Two lower cap-
Install
Through muffler bracket, rear
screws
cab guard (5), and frame
rail (para 2-14b). Do not
tighten
NOTE
Right hand lower shim (7) is 8-1/2 inches long.
c. Shim (7)
Install
Be sure slots in shim (7) fit
over capscrews. If neces-
sary, use a piece of 10
gauge metal to position
d. Two washers and
Install
On lower capscrews; para
locknuts
2-14b. Do not tighten
e. Two upper cap-
Install
screws
f. Shim (6)
Install
Be sure slots in shim (6) fit
over capscrews. If neces-
sary, use a piece of 10
gauge metal to position
g. Two washers and
Install and
On upper capscrews; para
locknuts
tighten
2-14b
h. Two lower cap-
Tighten
screws and
locknuts
13
Rear cab
Four capscrews
Tighten
guard (5),
(3 and 4) and
left hand
locknuts (1)
side
14
Rear cab
Chain hoist
Remove
guard (5),
top
15
Tractor,
Muffler and ex-
Install
right hand
haust stack
side
2-714
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |