 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-65.
BODY AND CAB MAINTENANCE (CONT)
c.
Rear Platform (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
WARNING
Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with
compressed air. Failure to do so could cause serious injury to eyes and possible blindness.
If you hurt your eyes or if a foreign object is blown into your eyes, seek medical attention
immediately.
4
All parts
Clean
Use cleaning solvent P-D-680
and stiff bristled brush;
dry thoroughly with com-
pressed air
INSPECTION/REPAIR
5
a. Rear platform
Inspect
Repair broken welds and
(3)
cracks by welding. Replace
a rear platform beyond
economical repair
b. All other parts
Inspect
Replace if cracked, broken,
distorted, or threads
damaged
INSTALLATION
6
Right
a. Locknut (11)
Install
Screw onto eyebolt (4) fully
frame rail
b. Eyebolt (4)
Install
c. Locknut (10)
Install
Screw onto end of eyebolt
(4). Do not tighten at
this time
7
Left frame
a.
Nut (9)
Install
Screw onto hook (2) fully
rail
b.
Hook (2)
Position
In toggle clamp (1)
c.
Nut (8)
Install
Do not tighten at this time
d.
Toggle clamp
Position
Align mounting holes
(1)
e. Two capscrews
Install and
(7), washers
tighten
(6), and
locknuts (5)
2-707
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals