|
|
TM 9-2320-285-24-1
2-58. STEERING SYSTEM MAINTENANCE (CONT)
c.
Power Steering Reservoir (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
SERVICING (cont)
4
Power
a. New filter
Install
steering
element (8)
reservoir,
b. Spring seat (7) Install
top
and spring
(6)
c. Cover (4) and
Install
new gasket
(5)
d. New O-ring (3)
Install
Press down on cover to
and wing bolt
compress spring (6)
(2)
e. Hydraulic oil
Install
Fill through dipstick opening
to full mark on dipstick
(1)
f.
Dipstick (1)
Install
NOTE
Start engine and turn steering wheel several times. Stop engine and
check hydraulic oil level on dipstick (1). Add oil if necessary.
REMOVAL
5
Power
a. Two gallon
Position
Under power steering gear to
steering
container
drain hydraulic oil
gear,
b. Connector
a. Loosen
bottom
b. Disconnect
c. Allow to
Dispose of used oil properly
drain
d. Cap
6
Power
a. Three hoses and
Disconnect
steering
fittings
and cap
reservoir
b. Four capscrews
Remove
Support reservoir
(9) and
washers (11)
c. Two brackets
Remove
As an assembly
(15), shell
(10), and
associated
parts
2-669
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |