|
|
TM 9-2320-285-24-1
2-53. TRAILER BRAKE LINES AND COUPLINGS (CONT)
a. Trailer Brake Lines and Couplings (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REPAIR
14
Hoses
a. Connector
Turn counterclockwise out of nut and hose
b. Nut
Turn clockwise and remove from hose
NOTE
Repeat steps 14a and 14b above to disassemble remaining connectors from hoses.
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't
breathe vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to
do so could cause seri- ous injury. If you become dizzy while using cleaning solvent, get fresh air and
medical attention immediate- ly. If contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water and seek medical aid immediately.
c. Connector and
Clean
Use cleaning solvent P-D-680;
nut
allow to air dry. Use wire
brush to remove all hose
residue from connector and
nut
d. Hose
Cut to proper
Use new hose; use old hose to
length
determine proper length
required. Cut hose square
using fine tooth hacksaw
e. Nut
Screw counterclockwise onto hose until hose
bottoms
f. Connector
Screw clockwise into nut and hose and
tighten securely
2-634
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |