|
|
TM 9-2320-285-24-1
2-52. AIR COMPRESSOR ASSEMBLY MAINTENANCE (CONT)
d. Air Compressor Governor (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Air
a. Two capscrews
Remove
Support governor (3)
compressor,
(1) and lock
rear
washers (2)
b. Governor (3)
Remove
c. Gasket (4)
Remove and
discard
CLEANING
2
a. Governor (3)
Clean
Wipe with clean, dry cloth
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't
breathe vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to
do so could cause seri- ous injury. If you become dizzy while using cleaning solvent, get fresh air and
medical attention immediate- ly. If contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water and seek medical aid immediately.
b. Capscrews (1)
Clean
Use cleaning solvent P-D-680;
and lock
dry with clean cloths
washers (2)
INSPECTION
3
a. Governor (3)
Inspect
Replace if cracked, inopera-
tive, or otherwise damaged
b. Capscrews (1)
Inspect
Replace if cracked, broken,
and lock
or threads damaged
washers (2)
2-618
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |