| 
 | ||||||||||
| 
 |  TM 9-2320-285-24-1 2-51. AIR BRAKE SYSTEM MAINTENANCE (CONT) b. Air Reservoirs (cont). STEP LOCATION ITEM ACTION REMARKS CLEANING (cont) 8 WARNING (cont) Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water and seek medical aid immediately. Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into your eyes, seek medical attention immediately. b. All other parts Clean Use cleaning solvent P-D-680; dry with compressed air INSPECTION 9 a. Tubing (2, 17, Inspect Replace if cracked, split, and 20) and chafed, or deteriorated. hose (6) Refer to step 10 below for hose (6) replacement; refer to step 11 below for tubing (2, 17, or 20) replacement b. Hose assembly Inspect Replace assembly if cracked, (3) split, deteriorated, or connectors damaged c. All other parts Inspect Replace if cracked, worn, distorted, or threads damaged. Refer to step 10 below for replacement of fittings (5 and 7); refer to step 11 below for replacement of connector (19) and elbows (1, 13, 16, 24, and 27) 2-577 | 
| Privacy Statement - Press Release - Copyright Information. - Contact Us |