 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-50.
SERVICE BRAKE SYSTEM MAINTENANCE (CONT)
b. Rear Axle Brakes (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY/INSTALLATION (cont)
6
h. Camshaft (14)
Insert
In spider (24), and brake
(cont)
chamber bracket (19). Then
remove tag
i. Washer (13) and
Install
On camshaft (14)
slack adjust-
er (12)
NOTE
In following step select quantity and thickness of washers (11) required. Washers (11) are available
in0.032 and 0.064 inch thicknesses.
j. Washer (11)
Install
On camshaft (14), as required
to stop at retaining ring
groove on camshaft
k. Retaining ring
Install
Use retaining ring pliers
(10)
l. Two lubrication
Install
fittings (33)
m. Shoe and lining
Position
On spider (24)
assembly (9)
NOTE
Center anchor pins (8) with shoe and lining assemblies(9), with flat of anchor pin (8) facing capscrew
(7)hole.
n. Two anchor pins Install
(8)
o. Two capscrews
Install and
(7)
tighten
p. New lockwire
Insert
Through heads of capscrews
(6)
(7); then use pliers to
twist
q. Four felts (5)
Install
On anchor pins (8)
and retainers
(4)
r. Four retaining
Install
Use retaining ring pliers
rings (3)
s. Upper shoe and
Rotate
Swing forward
lining assem-
bly (9)
2-554
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals