|
|
TM 9-2320-285-24-1
2-46.
SERVICE BRAKE SYSTEM TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
12.
REAR AXLE BRAKES FROZEN OR LOCKED (Cont)
Step 3.
Remove rear axle brakes air chambers (para 2-51d(2)).
Remove brake drums (para 2-44b).
Disassemble rear axle brakes (para 2-50b) and check slack adjuster,
camshaft, and associated parts for damage or wear.
If parts are damaged or worn, replace (para 2-50b).
13.
INSUFFICIENT BRAKE FORCE TO STOP VEHICLE (FRONT AXLE BRAKES)
Step 1.
Remove brake drums (para 2-44a).
Check brake shoe linings for excessive wear (worn to depth of groove at side of lining).
a. If brake shoe linings are excessively worn, replace brake shoes (para 2-50a).
b. If brake shoe linings are okay, go to step 2 below.
Step 2.
Check brake shoe linings for grease or dirt contamination.
a. If brake shoe linings are contaminated, replace brake shoes (para 2-50a).
b. If brake shoe linings are not contaminated, go to step 3 below.
Step 3.
Disassemble front axle brakes (para 2-50a) and check plungers for damage.
a. If plungers are damaged, replace (para 2-50a).
b. If plungers are not damaged, go to step 4 below.
Step 4.
Check front axle brakes air chambers for damage.
a. If front axle brakes air chambers are damaged, repair (para 2-51d(1)).
b. If front axle brakes air chambers are okay, go to step 5 below.
Step 5.
Check air brake system lines and fittings for air leaks.
a. If lines or fittings are leaking air, repair or replace (para 2-51a).
b. If lines and fittings are okay, refer to Malfunction 5 above.
2-530
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |