|
|
TM 9-2320-285-24-1
2-42. PROPELLER SHAFT MAINTENANCE (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
5
Splined
a. Remaining cap-
Remove; dis-
shaft (7)
screws (4),
card lock-
lockstraps
straps
(5), and
bearing
races (6)
b. Spider (12)
Remove
c. Dust cap (13)
Unscrew
Then slide up on splined
shaft (7)
d. Splined shaft
Remove
From sleeve tube (8)
(7)
e. Washer (14)
Remove
f. Cork washer
Remove and
(15)
discard
g. Dust cap (13)
Remove
From splined shaft (7)
h. Lubrication
Remove
From sleeve tube (8)
fitting (16)
CLEANING
6
a. Spiders (11 and
Clean
Use mineral spirits; dry
12) and bear-
with clean cloths
ings
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in
a well ventilated area. Avoid contact with skin, eyes, and clothes
and don't breathe vapors. Do not use near open flame or
excessive heat and don't smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using
cleaning solvent, get fresh air and medical attention immediately.
If contact with skin or clothes is made, flush with large amounts
of water. If contact with eyes is made, wash eyes with water and
seek medical aid immediately.
Compressed air must not exceed 30 psi. Wear safety glasses
when drying parts with compressed air. Failure to do so could
cause serious injury to eyes and possible blindness. If you hurt
your eyes or if a foreign object is blown into your eyes, seek
medical attention immediately.
2-497
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |