 |
|||
|
|
|||
|
Page Title:
Transmission Oil Sampling Valve |
|
||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
j.
Transmission Oil Sampling Valve.
This task covers:
a. Oil sampling
c. Cleaning
b. Removal
d. Inspection
e. Installation
INITIAL SETUP:
Tools
Personnel Required
No. 1 Common Organizational Maintenance
Wheel Vehicle Mechanic MOS 63B
Tool Kit
Safety glasses
Equipment Condition
Socket wrench set
Paragraph
Condition Description
Adjustable open end wrench
Parked on level surface; park-
Materials/Parts
ing brake applied; engine off.
Cleaning solvent
Item 1, Appendix C
2-34a
Battery ground cable discon-
Clean cloths
Item 2, Appendix C
nected.
Transmission oil
Item 8, Appendix C
2-65c
Rear platform removed.
STEP
LOCATION
ITEM
ACTION
REMARKS
OIL SAMPLING
1
Transmis-
a. Transmission
Warm up
Drive tractor for 15 minutes
sion, right
to warm oil; then shift to
side
neutral, apply parking
brakes, and idle engine
b. Container
Position
Under hose (4)
c. Hose (4)
Flush
Open valve (7) and drain one
pint of oil into container;
then close valve and remove
container
NOTE
Procure clean sample bottle and a copy of DD Form 2026 (Oil Analysis
Request) in accordance with local procedure.
d. Clean sample
a. Open
Remove bottle cap and place
bottle
on clean surface with edges
up
b. Position
Under hose (4)
c. Fill
Open valve (7) and fill
sample bottle to within 1/2
inch of top
2-486
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals