 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
h.
Shift Lockout Cylinder, Lines, and Fittings (cont).
(1) Shift Lockout Lines and Fittings (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
8
b. All other parts
Inspect
Replace if cracked, worn,
(cont)
distorted, or threads
damaged. Refer to step 9
below for replacement of
hose connectors (10 and
16); refer to step 10 below
for replacement of tubing
connectors (1, 3, 5, and 8)
REPAIR
9
Hose (11)
a. Connector
Place connector socket in vise as shown
(10 or 16)
b. Mandrel assem-
Install in connector nipple; tighten nut of
bly tool
connector. Turn tool counterclockwise to
remove connector nipple and nut
c.
Hose (11)
Turn hose (11) clockwise out of connector
(10 or 16) socket; discard hose (11)
NOTE
Repeat steps 9a thru 9c above to remove remaining connector (10 or 16)
from hose (11).
2-471
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals