 |
|||
|
|
|||
|
Page Title:
Draining and Refilling Transmission Fluid |
|
||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
b. Draining and Refilling Transmission Fluid.
STEP
LOCATION
ITEM
ACTION
REMARKS
4
b. Capscrews (3)
Install
Install four capscrews (3)
(cont)
through corners of trans-
mission oil pan (4). Hand
tighten. Then completely
install 17 remaining cap-
screws (3) by hand. Alter-
nately tighten capscrews
180 degrees apart to 5
pounds foot torque. Repeat
process, tightening to
10-15 pounds foot
c. Transmission
Install
dipstick tube
5
Dipstick
a. 15 U.S. quarts
Pour
Pour 21 quarts only if torque
tube
transmission
converter is empty
fluid
b. Transmission
a. Check
Start engine and shift trans-
fluid level
mission through all ranges.
Shift to neutral. Run
engine for one minute at
1000-1200 rpm; then idle
engine. Insert and remove
dipstick with engine idling
to check level. Add fluid
if necessary to bring fluid
level to ADD mark on dip-
stick
b. Recheck
Operate tractor until engine
coolant reaches 170 degrees
and repeat level check
above. Add fluid if neces-
sary to bring fluid level
to FULL mark on dipstick
6
Tractor,
Rear platform
Install
rear
2-435
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals