|
|
TM 9-2320-285-24-1
2-40. REAR AXLE TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. LUBRICANT LEAKING FROM DIFFERENTIAL BREATHER
Check lubricant level.
Drain to proper level (para 2-44a).
2. CONTINUOUS AXLE OR WHEEL NOISE
Step 1.
Check rear wheel lug nuts for looseness.
a. If lug nuts are loose, tighten (para 2-57).
b. If lug nuts are tight, go to step 2 below.
Step 2.
Check lubricant level.
a. If lubricant level is below level plug opening, add lubricant (para 2-44a).
b If lubricant level is at level plug opening, go to step 3 below.
Step 3.
Check wheel bearings for proper adjustment (raise wheel and use pry bar to check for any noticeable
end play) or damage. Repeat for other wheels.
a. If end play is noticeable, adjust or replace wheel bearings (para 2-44b).
b. If end play is not noticeable, go to step 4 below.
Step 4.
Check axle shafts for damage.
a. If axle shafts are damaged, replace (para 2-44b).
b. If axle shafts are not damaged, notify direct support maintenance.
3. DIFFERENTIAL CARRIER ASSEMBLY OVERHEATING
Check lubricant level.
a. If lubricant level is below level plug opening, add lubricant (para 2-44a).
b. If lubricant level is at level plug opening, notify direct support maintenance.
2-430
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |