TRANSMISSION FLUID DIRTY (Cont)

TM 9-2320-285-24-1

2-37.

TRANSMISSION TROUBLESHOOTING (CONT)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

2. TRANSMISSION FLUID DIRTY (Cont)

Step 2.

Examine oil filter for damage.

a. If oil filter is damaged, replace filter (para 2-41c) and change transmission fluid (para 2-41b).

b. If oil filter is not damaged, go to step 3 below.

Step 3.

Operate transmission; TRANS/TORQUE CONVERTER light should be off.

a. If TRANS/TORQUE CONVERTER light is on, go to Malfunction 5 below.

b. If light is not on, notify direct support maintenance.

3. TRANSMISSION FLUID SMELLS BURNED

Step 1.

Check fluid level on transmission dipstick with transmission at

operating temperature and engine operating.

a. If fluid level is above FULL mark, drain (para 2-41b) until

fluid level is between FULL and ADD marks.

b. If fluid level is below ADD mark, fill (para 2-41b) to FULL mark.

c. If fluid level is correct, go to step 2 below.

Step 2.

Operate transmission and check to see if TRANS/TORQUE CONVERTER light is on.

a. If TRANS/TORQUE CONVERTER light is on, go to Malfunction 5 below.

b. If TRANS/TORQUE CONVERTER light is not on, notify direct support maintenance.

4. TRANSMISSION FLUID IS FOAMY

Step 1.

Check fluid level on transmission dipstick with transmission at

operating temperature and engine operating.

a. If fluid level is above FULL mark, drain (para 2-41b) until fluid level is between FULL

and ADD marks.

b. If fluid level is not above FULL mark, go to step 2 below.

2-422