CLEANING - TM-9-2320-285-24-10427

TM 9-2320-285-24-1

2-35.

WIRING HARNESS MAINTENANCE (CONT)

Instrument Panel Harnesses (cont).

(2)

Right Corner Panel Harness (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

a. Right corner

Clean

Wipe with a clean, dry cloth

panel harness

where wiring is accessible

(3)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective

goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and

clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you become dizzy while

using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or

clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes

with water and seek medical aid immediately.

b. Connectors

Clean

Use clean cloth moistened

(1 and 2)

with cleaning solvent

P-D-680; dry with clean

cloths

INSPECTION/REPAIR

a. Connectors

a. Tag

(1 and 2)

b. Disconnect

c. Inspect

Replace right corner panel

harness (3) if connector

bent or damaged (notify

direct support maintenance)

NOTE

Gage of replacement wire must be greater than or equal to gage of defective wire.

2-404