REMOVAL - TM-9-2320-285-24-10383

TM 9-2320-285-24-1

2-32.

SENDING UNITS AND SWITCHES MAINTENANCE (CONT) |

Stop Light Switches (cont).

(1) Service Brakes Stop Light Switch (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL

NOTE

Tag and identify all electrical leads before disconnection and removal.

Left hand

a. Two electrical

Tag

frame rail,

leads (3 and

inside

b. Two nuts (1)

Remove

and lock

washers (2)

c. Two electrical

Disconnect

leads (3 and

d. Stop light

Remove

Rotate counterclockwise

switch (5)

CLEANING

a. Two electrical

Clean

Wipe with clean, dry cloth

leads (3 and

4) and stop

light switch

(5)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors .Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact

with eyes is made, wash eyes with water and seek medical aid immediately. Compressed air must not

exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do so could cause

serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into your

eyes, seek medical attention immediately.

2-360