 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-32.
SENDING UNITS AND SWITCHES MAINTENANCE (CONT)
e. Neutral Start and Backup Light Switches (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENT/TEST (cont)
5
a. Shift lever
Position
In drive position 2
b. Nut (14)
Remove
c. Lock screw (15)
a. Remove
Apply thin coat of grease to
threads
b. Install
d. Nut (14)
Install
Do not tighten
e. Lock screw (15)
Adjust
Adjust lock screw (2) so that
screw depresses ball on
neutral start switch 1/8
inch when shift lever is in
neutral (N) position
f. Neutral start
Test
Check that neutral start
switch (7)
switch actuates in neutral
(N) position only, and that
switch opens within 3-1/2
degrees of angular travel
from bottomed position of
shift lever
g. Nut (14)
Tighten
To 33 pounds inch torque
6
Backup light
Test
Check that rear floodlight is
switch (4)
on with engine idling and
shift lever in reverse (R)
position
2-358
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals