|
|
TM 9-2320-285-24-1
2-31. LIGHT SYSTEMS MAINTENANCE (CONT)
e. Marker Lights (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Cab roof,
a. Two screws (1),
Remove
outside
retainer (2),
and lens (3)
b. Retainer (2)
Separate
and lens (3)
c. Lamp (4)
Remove
NOTE
Perform steps 2 and 3 below only if replacement of marker light assembly is required.
2
Cab roof,
a. Upper cab
Remove
Trace electrical lead (11)
inside
harness tape
into upper cab harness.
Remove tape until wire
connector (5) is exposed
b. Wire connector
Remove
Cut wire leads (11 and 12)
(5)
as close as possible to
connector (5)
3
Cab roof,
a. Four screws (6)
Remove
outside
b. Gasket (7),
Remove
As an assembly
lamp base
(8), grommet
(9), mounting
pad (10), and
electrical
lead (11)
CLEANING
4
a. Lens (3)
Clean
Rinse lens in clear water;
dry with clean, dry cloth
2-329
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |