 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-28.
ENGINE WARNING KIT MAINTENANCE (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
10
c. Remaining parts
Clean
Use cleaning solvent P-D-680;
(cont)
dry using clean cloths
INSPECTION
11
a. Alarmstat
Inspect for
Replace if defects observed
sensor (1),
cracks
oil pressure
corrosion
warning send-
breaks
er (2), and
loose
oil pressure
terminals
sender (3)
damaged
threads
b. Hose (7)
Inspect for
Replace if defects observed;
cracks
refer to step 12 below for
breaks
repair procedure
cuts
deteriora-
tion
c. Fitting (6) and
Inspect for
Replace if defects observed;
elbow (4)
cracks
refer to step 12 below for
breaks
repair procedure
damaged
threads
d. Remaining parts
Inspect for
Replace if defects observed
cracks
breaks
deforma-
tion
damaged
threads
REPAIR
CAUTION
If fitting (6) and/or elbow (4) require replacement, discard hose (7). If hose is reused, oil leakage could
occur causing damage to engine.
12
Hose (7)
a. Fitting (6)
Place fitting socket in vise as shown
b. Fitting nipple
Use open end wrench and unscrew nipple
counterclockwise out of fitting socket
c. Hose (7)
Turn hose (7) clockwise out of fitting
socket
2-295
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals