REMOVAL (cont) - TM-9-2320-285-24-10312

TM 9-2320-285-24-1

2-27.

TURN SIGNAL CONTROL MAINTENANCE (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

i. Turn signal

Remove

As an assembly. Carefully

(cont)

switch (11),

pull assembly up and out

hazard warning

of steering column

switch (12),

horn contact

(13), socket

(14), and

eight elec-

trical leads

(15)

CLEANING

a. Switch assembly

Clean

Wipe with clean, dry, lint-

(11 thru 15)

free cloth

b. Horn contact

Clean

Wipe with clean cloth moist-

(13)

ened with denatured alcohol

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact

with eyes is made, wash eyes with water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

c. All other metal

Clean

Use cleaning solvent P-D-680;

parts

dry with compressed air

2-289