|
|
TM 9-2320-285-24-1
2-25.
STARTING SYSTEM MAINTENANCE (CONT)
b.
Starter.
This task covers:
a.
Removal
d.
Installation
b.
Cleaning
e.
Testing
c.
Inspection
INITIAL SETUP
Tools
Personnel Required
No.
1 Common Organizational Maintenance
Two Wheel Vehicle Mechanics MOS 63B
Tool Kit
Socket wrench set
Equipment Condition
Adjustable open end wrench
Paragraph
Condition Description
Safety glasses
Scratch wire brush
Parked on level surface; park-
ing brake applied; engine off.
Cab tilted 45 degrees.
Materials/Parts
2-34a
Battery ground cable
Cleaning solvent
Item 1, Appendix C
disconnected.
Clean cloths
Item 2, Appendix C
2-25a
Wires and leads disconnected.
Tags
Item 14, Appendix C
Solenoid and circuit breaker
Detergent
Item 27, Appendix C
removed.
Gasket
FSCM 72582 PN 5130955
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Starter
a. Nut (1)
Remove
(7)
b. Ground strap
Disconnect
From starter (7)
(2)
2
Air com-
a. Capscrew (3)
Remove
pressor
and lock
washer (4)
b. Ground strap
Disconnect
(2)
and remove
3
Starter
a. Nut (5)
Remove
(7)
b. Battery posi-
Disconnect
tive cable
(6)
c. Capscrew (8),
Remove
Support starter (7)
capscrew (9)
and two lock
washers (10)
d. Starter (7)
Remove
e. Gasket (11)
Remove and
discard
2-210
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |