REMOVAL (cont) - TM-9-2320-285-24-10228

TM 9-2320-285-24-1

2-25.

STARTING SYSTEM MAINTENANCE (CONT)

Solenoid and 70 AMP Circuit Breaker (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

Two capscrews

Remove

Support plate (33)

(cont)(32)

u. Plate (33)

Remove

v. Screw (34) and

Remove

lock washer

(35)

w. Red wire (36)

Disconnect

x. Two locknuts

Remove

(37), washers

(38), and

screws (39)

y. Circuit breaker

Remove

(40)

z. Capscrew (41),

Remove

lock washer

(42), and

bracket (27)

CLEANING

a. Wires

Clean

Use clean cloth moistened

with detergent; wipe dry

using clean cloths

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you

become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water and seek medical aid immediately.

b. Solenoid (31)

Clean

Use clean cloth moistened

and circuit

with cleaning solvent P-D-

breaker (40)

680; dry using clean cloths

c. Remaining parts

Clean

Use cleaning solvent P-D-680;

dry using clean cloths

2-205