|
|
TM 9-2320-285-24-1
2-15.
COOLING SYSTEM MAINTENANCE (CONT)
d.
Fan and Drive Belts (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
2
b. All other parts
Clean
Use cleaning solvent P-D-680;
(cont)
dry with compressed air
INSPECTION
3
a. Belt set (11)
Inspect
Replace as a matched set if
either belt is cracked,
split, frayed, or worn
b. Tubing (5)
Inspect
Replace if cracked, split, or
holes are visible
c. Fan (3)
Inspect
Replace if mounting holes are
elongated, or if any blade
is loose, cracked, bent, or
otherwise damaged
d. All other parts
Inspect
Replace if cracked, damaged,
or threads damaged
INSTALLATION
NOTE
Perform steps h and i below to install belt set (11) only.
4
Engine,
a. Fan drive
Position
At front of engine
front
support (20)
b. Capscrews (16
Install and
Tighten to 48 pounds foot
and 18) and
tighten
lock washers
(17 and 19)
c. Bracket (15)
Position
At top of fan drive support
(20)
d. Two capscrews
Install and
Tighten to 33 pounds foot
(13) and lock
tighten
washers (14)
e. Fan (3)
Position
Carefully place inside
radiator shroud
f. Fan clutch
Position
On fan drive support (20),
assembly (12)
with mounting holes aligned
g. Four capscrews
Install
Do not tighten at this time
(6), lock
loosely
washers (7),
and washers
(8)
2-152
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |