|
|
TM 9-2320-285-24-1
2-15.
COOLING SYSTEM MAINTENANCE (CONT)
b.
Coolant Filter (cont).
(2)
Removal (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
3
b. All other parts Clean
Use cleaning solvent P-D-680.
(cont)
Dry with compressed air
INSPECTION
4
a. Hoses and
Inspect
Replace if cracked, split, or
fittings
holes are apparent. Check
inside diameter for block-
age; clear blockage or
replace part
b. All other parts
Inspect
Replace if damaged or cracked
or if threads are damaged
INSTALLATION
5
Rail,
a. Filter head
Position
On rail; align mounting holes
behind
(16)
cab guard
b. Two capscrews
Install and
Secures filter head (16)
(15) and
tighten
locknuts (14)
c. Hoses (3 and 7)
Route
d. Protective hose
Position
Over hoses (3 and 7)
(18)
e. Connector (11)
a. Tape
Wrap threads with Teflon tape
b. Install
f. Clamp (10)
Install
On hose (7)
g. Hose (7)
Connect
To connector (11); tighten
clamp (10)
h. Connector (13)
a. Tape
Wrap threads with Teflon tape
b. Install
i. Clamp (12)
Install
On hose (3)
j. Hose (3)
Connect
To connector (13); tighten
clamp (12)
k. New tie strap
Install
Around hoses (3 and 7) at
(19)
location noted during
removal
l. Two new tie
Install
Around protective hose (18)
straps (17)at locations noted
during removal
2-141
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |