|
|
TM 9-2320-285-24-1
2-14.
EXHAUST SYSTEM MAINTENANCE (CONT)
b.
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
2
All parts
Clean
Use cleaning solvent P-D-
680. Dry thoroughly with
compressed air at 30 psi.
Remove rust with stiff
wire brush
INSPECTION
3
All parts
Inspect
Replace if cracked, damaged,
worn, dented, or threads
damaged
INSTALLATION
4
Tractor,
a. Bracket (28)
Position
Align mounting holes with
right
holes in rear cab guard
side
and frame rail
b. Two capscrews
Install
In bottom holes
(27)
c. Lower shim
Install
d. Two capscrews
Install
In top holes
(27)
e. Upper shim
Install
f. Four washers
Install and
(26) and
tighten
locknuts (25)
g. Rear cab guard
Remove
From right side
support
h. Bracket (19)
Position
On bracket (28)
i. Four capscrews
Install and
(23) and nuts
tighten
(24)
j. two clamps (22)
Position
On muffler (18)
k. Cage (17)
Position
I. Six screws (16)
Install and
tighten
m. Two capscrews
Install and
(21) and nuts
tighten
(20)
n. Muffler (18)
Install
In bracket (19)
o. Rain cap (11)
Position
On tailpipe (4)
p. Capscrew (10)
Install and
and nut (9)
tighten
2-123
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |