CLEANING (cont) - TM-9-2320-285-24-10118

TM 9-2320-285-24-1

2-13.

FUEL SYSTEM MAINTENANCE (CONT)

c. Fuel Filters (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING (cont)

WARNING

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

Filter heads

Clean

Use cleaning solvent P-D-680;

(7 and 12)

dry with compressed air

INSPECTION

a. Filter heads

Inspect

Replace if cracked or threads

(7 and 12)

damaged

b. Capscrews (5

Inspect

Replace if threads damaged

and 10),

locknuts (6

and 11), and

plugs (3, 4,

8, and 9)

INSTALLATION

Secondary

a. Plugs (8 and 9)

Install and

filter

tighten

head (12)

b. Secondary

Position

filter head

(12)

c. Two capscrews

Install and

(10) and

tighten

locknuts (11)

d. Filter head

Connect and

Pars 2-13b(2)

(12) lines

tighten

Primary

a. Plugs (3 and 4)

Install and

filter

tighten

head (7)

b. Primary filter

Position

head (7)

c. Two capscrews

Install and

(5) and

tighten

locknuts (6)

2-95