|
|
TM 9-2320-285-24-1
2-13.
FUEL SYSTEM MAINTENANCE (CONT)
b.
Fuel Tank, Lines and Fittings.
(2) Lines and Fittings (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REPAIR (cont)
NOTE
Repeat steps b through e above to install remaining swivel connector on hose; perform step
18 below to install 45 degree connectors (11 or 20) on hose (12 or 16).
18
Hose assem-
a. 45 degree con-
Place connector socket in vise
bly (12 or
nector (11
16)
or 20)
b. Hose
Screw hose counterclockwise into socket
until hose bottoms; back off hose 1/4 to
1/2 turn
c. 45 degree con-
Oil nipple threads and inside of hose
nector nipple
liberally using hydraulic oil. Screw
and nut
nipple clockwise into socket and hose
until nut near nipple bottoms on socket.
Remove hose from vise
INSTALLATION
19
Fuel pump
Elbow (36)
Install
(33)
20
Engine,
a. Coupling fork
Position
rear
(35)
b. Gasket (34)
Position
2-89
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |