|
|
TM 9-2320-285-24-1
2-13.
FUEL SYSTEM MAINTENANCE (CONT)
a.
Air Cleaner Assembly and Restriction Indicator.
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
19
Plenum (31)
a. Plenum (31)
Position
b. Three capscrews
Install and
On rear brackets (34 and 41)
(28), washers
tighten
only
(30), and
locknuts (29)
c. Bracket (26)
Position
On plenum (31)
d. Two capscrews
Install
Through brackets (37 and 26)
(28), washers
and plenum (31); do not
(30), and
tighten
locknuts (29)
e. Bracket (25)
Position
On plenum (31) rear; align
with 5th and 8th holes from
right hand side
f. Two capscrews
Install and
Secures bracket (25)
(23) and nuts
tighten
(24)
g. Two brackets
Position
On plenum (31) right and left
(27)
hand sides, align with 2nd
and 3rd holes from rear
h. Four capscrews
Install and
Secures brackets (27)
(23) and nuts
tighten
(24)
i. Two capscrews
Install
On bracket (26); do not
(23) and nuts
tighten
(24)
20
Intake
a. Elbow (22) and
Connect and
To bottom of plenum (31)
tube (18)
clamp (12)
tighten
b. Bracket (21)
Position
On plenum (31) rear; align
with 7th hole from right
hand side
c. Capscrew (20)
Install and
Secures bracket (21)
and nut (19)
tighten
d. Clamp (17), U-
Install
On bracket (21); do not
bolt (16),
tighten
two washers
(15), and
nuts (14)
e. Clamp (12)
Position
Slide onto elbow (22); do not
tighten
f. Intake tube
a. Position
Through U-bolt (16)
(18)
b. Connect
To elbow (22)
g. Clamp (12)
Tighten
Secures tube (18) to elbow
(22)
2-73
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |