 |
|||
|
|
|||
|
Page Title:
ENGINE STARTS BUT WILL NOT RUN (Cont) |
|
||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-8.
ENGINE TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
ENGINE STARTS BUT WILL NOT RUN (Cont)
Step 2. Shut down engine, press reset button on top of restriction indicator, and check that red band disappears
from view.
a.
If red band does not disappear from view with engine shut down and reset button depressed, replace air
cleaner restriction indicator (para 2-13a).
b. If red band disappears from view, go to step 3 below.
Step 3.
Start engine.
a.
If red band reappears when engine is cranked, service air cleaner (para 2-13a).
b.
If red band does not reappear, go to step 4 below.
Step 4.
Check if fuel level is low (LOW FUEL INDICATOR lamp lights and FUEL gage indicates empty (E)).
a.
If fuel level is low, fill tank with proper grade of fuel (para 2-13b(1)).
b.
If fuel level is not low, go to step 5 below.
Step 5.
Check fuel filters for clogged condition.
a.
If fuel filters are clogged, replace (para 2-13c).
b.
If fuel filters are not clogged, go to step 6 below.
Step 6.
Check for incorrect or contaminated fuel in fuel tank (if contaminated, fuel will have a milky-white
coloring).
a.
If fuel is contaminated, drain, clean, and fill fuel tank (para 2-13b(1)) and replace fuel filters (para 2-13c).
b.
If fuel is not contaminated, go to step 7 below.
Step 7.
Have an assistant depress and release accelerator pedal. Watch for accelerator cable movement at the
engine governor.
a.
If accelerator cable does not move, repair or replace accelerator and throttle linkage (para 2-13e).
b.
If accelerator cable moves, notify direct support maintenance.
2-21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals