Recoverability Code - TM-9-2320-270-20P0015

TM9-2320-270-20P

SECTION I

d. PART NUMBER (Column (4)). Indicates the

Depot is the lowest level that can do com-

D-

primary number used by the manufacturer (individual,

plete repair of the item.

company, firm, corporation, or Government activity),

L-

Specialized repair activity is the lowest

which controls the design and characteristics of the

level that can do complete repair of the

i t e m by means o f its engineering drawings,

item.

specifications standards, and inspection requirements

to identify an item or range of items.

Nonreparable. No repair is authorized.

Z-

NOTE: When you use a NSN to requisition an item, the

No repair is authorized. (No parts or spe-

B-

item you receive may have a different part number

cial tools are authorized for the main-

form the part ordered.

tenance of a "B" coded item). However,

the item may be reconditioned by adjust-

e. DESCRIPTION AND USABLE ON CODE

ing, lubrication, etc., at the user level.

(UOC) (Column (5)). This column includes the

following information:

(3) Recoverability Code. Recoverability codes

are assigned to items to indicate the disposition action

( 1 ) The Federal item name and, when

on unserviceable items. The recoverability code is

required, a minimum description to identify the item.

entered in the fifth position of the SMR Code as

Not

(2) Physical

security classification.

follows:

applicable

Application/Explanation

Code

(3) Items that are included in kits and sets are

Nonreparable item. When unserviceable,

Z-

listed below the name of the kit or set on Figure KIT.

condemn and dispose of the item at the

(4) Spare/repair parts that make up and

level of maintenance shown in 3d position

assembled item are listed immediately following the

of SMR Code.

assembled item line entry.

Reparable item. When uneconomically

O-

(5) Part numbers for bulk materials are

reparable, condemn and dispose of the

referenced in this column in the line item entry for the

item at unit maintenance or aviation unit

item to be manufactured/fabricated.

level.

(6) When the item is not used with all serial

Reparable item. When uneconomically

F-

numbers of the same model, the effective serial

reparable, condemn and dispose of the

numbers are shown on the last line(s) of the

item at the intermediate direct support or

aviation intermediate level.

description (before UOC). Not applicable.

(7) The usable on code, when applicable (see

Reparable item. When uneconomically

H-

reparable, condemn and dispose of the

paragraph 5, Special information)

item at the intermediate general support

(8) In the Special Tools List section, the basis

level.

of issue (BOI) appears as the last line(s) in the entry

for each special tool, special TM DE, and other special

Reparable item. When beyond lower level

D-

repair capability, return to depot. Condem-

support equipment. When density of equipments

supported exceeds density spread indicated in the

nation and disposal of item not authorized

basis of issue, the total authorization is increased

below depot level.

proportionately.

Reparable item. Condemnation and dis-

L-

posal of item not authorized below special-

(9) The statement `END OF FIGURE" appears

ized repair activity (SRA).

just below the last item description in Column 5 for a

given figure in both Section II and Section Ill.

Item requires special handling or condem-

A-

nation procedures because of specific

f. QTY (Column (6)). The QTY (quantity per figure

reasons (e.g., precious metal content, high

column) indicates the quantity of the item used in the

breakout shown on the illustration figure, which is

dollar value, critical material, or hazardous

prepared for a functional group, subfunctional group, or

material).

Refer

appropriate

manuals/directives for specific instructions.

an assembly. A "V" appearing in this column in lieu of a

quantity indicates that the quantity is variable and the

c. FSCM (Column (3)). The Federal Supply Code

quantity may vary from application to application.

for Manufacturer (FSCM) is a 5-digit numeric code

4. Explanation of Columns (Section IV).

which is used to identify the manufacturer, distributor,

or Government agency, etc., that supplies the item.

a. NATIONAL STOCK NUMBER (NSN) INDEX.