|
|
TM 9-2320-270-20-3
HEATER MOTOR SUPPRESSOR - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
CLEANING
Clean according to general maintenance
All parts
5.
instructions (page 4-1).
inspection/REPLACEMENT
inspect according to general maintenance
All parts
6.
instructions (page 4-1).
INSTALLATION
NOTE
Suppressor must be installed correctly or it will not work. Flange end must be connected
to resistor wire.
Slide in so it is even on both sides.
Suppressor (2)
7. Bracket (1)
Put in place and hold.
Bracket (1)
8. Heater(3)
Screw in and tighten using 1/4-inch
Screw (4)
9. Bracket (1) to
socket, handle, and extension.
heater (3)
Put on.
Red wire to motor
10. Screw (5)
(6) and new
Iockwasher (7)
Screw in and tighten using screwdriver.
Screw (5)
11. Terminal (8)
Put on.
Red wire to resistor
12. Screw (9)
(10) and new
Iockwasher(11)
Screw in and tighten using screwdriver.
Screw (9)
13. Terminal (12)
4-1318
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |