|
|
TM 9-2320-270-20-3
HEATER HOSES - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY
Using pocket knife, cut from bulk stock
New return hose (1)
25.
same length as old hoses (1) and (2).
and heater hose (2)
Lube lightly with soap and push in half
Nipple (3)
26. Heater hose (2)
way.
Slide into place and tighten using
Clamp (4
27. Nipple (3) to
screwdriver.
heater hose (2)
Lube nipple (3) lightly with soap and push
New elbow (5)
28. Nipple (3)
until seated against hose (2).
Slide into place and tighten using
Clamp (6)
20. New elbow (5)
screwdriver.
to nipple(3)
Lube lightly with soap and push in half
Nipple (7)
30. Heater return
way.
hose (1)
Slide into place and tighten using
Clamp (8)
31. Nipple (7) to
screwdriver.
return hose (1)
Lube nipple (7) lightly with soap and push
New elbow (9)
32. Nipple (7)
until seated against return hose (l).
Slide into place and tighten using
Clamp (10)
33. New elbow (9)
screwdriver.
to nipple(7)
TA240817
4-1298
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |